ADTRAN 1000R Series spanning-tree forward-time <seconds>

Command Reference Guide Global Configuration Mode Command Set

spanning-tree forward-time <seconds>

Use the spanning-tree forward-time command to specify the delay interval (in seconds) when forwarding

spanning-tree packets. Use the no form of this command to return to the default interval.

Syntax Description

<seconds> Specifies the forwarding delay interval in seconds (Range: 4 to 30).

Default Values

By default, the forwarding delay is set to 15 seconds.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 5.1 Command was introduced.

Usage Examples

The following example sets the forwarding time to 18 seconds:

(config)#spanning-tree forward-time 18