ADTRAN 1000R Series - page 975

Command Reference Guide HDLC Command Set
61200510L1-35E Copyright © 2005 ADTRAN 975
lldp receive
Use the lldp receive command to allow LLDP packets to be received on this interface.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 9.1 Command was introduced.
Usage Examples
The following example configures the HDLC interface to receive LLDP packets:
(config)#interface hdlc 1
(config-hdlc 1)#lldp receive