ADTRAN 1000R Series state [active | suspend]

Command Reference Guide VLAN Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1166
state [active | suspend]
Use the state command to change the state of the VLAN.
Syntax Description
active Changes the VLAN state to active.
suspend Changes the VLAN state to suspended.
Default Values
The default setting is active (once the VLAN has been created).
Applicable Platforms
This command applies to the NetVanta 1000, 1000R, and 2000 Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example sets the VLAN state to suspended:
(config)#vlan 2
(config-vlan 1)#state suspend