ADTRAN 1000R Series soft-reconfiguration inbound

Command Reference Guide BGP Neighbor Configuration Command Set

soft-reconfiguration inbound

Use the soft-reconfiguration inbound command to enable this unit to store BGP updates for the specified

neighbor. Use the no form of this command to return to default settings.

Syntax Description

No subcommands.

Default Values

By default, this command is enabled.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 9.3 Command was introduced.

Functional Notes

BGP updates are store d prior to filtering, thus allowing the clear ip bgp soft command to be used in the

absence of route refresh (RFC2918) capability. This command affects all neighbors. See clear ip bgp [* |

<as-number> | <ip address>] [in | out | soft] on page 53 for more information.

Usage Examples

The following example enables the unit to store BGP updates for the specified neighbor:

(config)#router bgp-neighbor 192.22.73.101

(config-bgp-neighbor)#soft-reconfiguration inbound