ADTRAN 1000R Series spanning-tree mode [rstp | stp]

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 522
spanning-tree mode [rstp | stp]
Use the spanning-tree mode command to choose a spanning-tree mode of operat ion.
Syntax Description
rstp Enables rapid spanning-tree protocol.
stp Enables spanning-tree protocol.
Default Values
By default, spanning-tree mode is set to rstp.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example sets the spanning -tree mode to rapid spanning-tree protocol:
(config)#spanning-tree mode rstp