ADTRAN 1000R Series prefix-list <listname> [in

Command Reference Guide BGP Neighbor Configuration Command Set

prefix-list <listname> [in | out]

Use the prefix-list command to assign a predefined prefix list to a BGP neighbor. The list is then used to

filter BGP route updates received and/or sent from/by the specified peer. Use the no form of this command

to discontinue use of the prefix list.

Syntax Description

<listname> Assigns a prefix list to this BGP neighbor.

in Specifies the filtering of all inbound BGP route updates received from the

specified peer.

out Specifies the filtering of all outbound BGP route updates being sent to the

specified peer.

Default Values

By default, no prefix lists are specified for filtering.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 9.3 Command was introduced.

Functional Notes

Before they can be assigned to a BGP neighbor, prefix lists must first be defined using the ip prefix-list

command. See ip prefix-list <listname> description <“text”> on page 444 for more information.

Usage Examples

The following example uses the MyList prefix list to filter all BGP updates received from the spe cified peer:

(config)#router bgp-neighbor 192.22.73.101

(config-bgp-neighbor)#prefix-list MyList in