ADTRAN 1000R Series debug firewall

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 107
debug firewall
Use the debug firewall command to activate debug messages associated with the AOS firewall operation.
Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no form of this
command to disable the debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 2.1 Command was introduced.
Functional Notes
The debug firewall command activates debug messages to provide real-time information about the AOS
stateful inspection firewall operation.
Usage Examples
The following example activate s the debug messages for the AOS st ateful inspection firewall:
>enable
#debug firewall