ADTRAN 1000R Series copy <filename> in terface <interface> <slot/port>

Command Reference Guide Enable Mode Command Set

copy <filename> in terface <interface> <slot/port>

Use the copy interface command to copy a file to a specified interface.

Syntax Description

<filename> Specifies file name of source file to copy.

<interface> Specifies interface to be upgraded.

<slot/port> Specifies slot and port number of interface.

Default Values

No default is necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series

units.

Command History

Release 8.1 Command was introduced.

Usage Examples

The following example upgrades the ADSL interface with the firmware file configfile:

>enable

#copy configfile interface adsl 0/1