ADTRAN 1000R Series debug ip mrouting

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 124
debug ip mrouting
Use the debug ip mrouting command to activate debug messages associated with multicast table routing
events. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the no form of
this command to disable the debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 10.1 Command was introdu ced.
Usage Examples
The following sample activates ip mrouting debug messages:
>enable
#debug ip mrouting