ADTRAN 1000R Series debug ip http [verbose]

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 121
debug ip http [verbose]
Use the debug ip http command to activate debug messages associated with HyperText Transfer Protocol
(HTTP) operation in the AOS. Debug m essages are displayed (real time) to the terminal (or Telnet) screen.
Use the no form of this command to disable the debug messages.
Syntax Description
verbose Activates detailed deb ug messages for HTTP operation.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 and Total Access 900 Series units.
Command History
Release 6.1 Command was introduced.
Usage Examples
The following example activates debug messages associated with HTTP activity:
>enable
#debug ip http