ADTRAN 1000R Series - page 803

Command Reference Guide Demand Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 803
hold-queue <queue size> out
Use the hold-queue out command to change the overall size of an interfa ce's WAN output queue.
Syntax Description
<queue size> S pecifies the tot al number of packets th e output queue can contain before packets
are dropped. Range is 16 to 1000.
Default Values
The default queue size for WFQ is 400. The default queue size for PPP FIFO and Frame Relay
round-robin is 200.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 5.1 Command was introduced.
Release 11.1 Command expanded to include the demand interface.
Usage Examples
The following example sets the overall output queue size to 700:
(config)#interface demand 1
(config-demand 1)#hold-queue 700 out