ADTRAN 1000R Series debug atm packet

Command Reference Guide Enable Mode Command Set

debug atm packet

Use the debug atm packet command to activate debug messages associated with packets on ATM ports

and virtual circuits. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no

form of this command to disable the debug messages.

Variations of this command include the following:

debug atm packet

debug atm packet interface atm <port id>

debug atm packet interface atm <port id> vcd <vcd number>

debug atm packet vc <VPI/VCI>

Syntax Description

interface atm <port id> Shows packets on a specific ATM port and on all virtual circuits.

vc <VPI/VCI> Shows packets on a specific virtual circuit identified by the virtual path

identifier and virtual channel identifier (VPI/VCI).

vcd <vcd number> Shows packets on specific virtual circuit descriptors (VCD).

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.

Command History

Release 8.1 Command was introduced.

Usage Examples

The following example activates debug ATM packet debug messages on ATM port 1:

>enable

#debug atm packet interface atm 1