ADTRAN 1000R Series show test-pattern

Command Reference Guide E1 Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 606
show test-pattern
Use the show test-pattern command to display results from test patterns inserted using the test-pattern
command (see test-pattern [clear | insert | ones| p215 | p220 | p511 | qrss | zeros] on page 6 11 for more
information).
Syntax Description
No subcommands.
Default Values
No default s necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 7.1 Command was introduced.
Usage Examples
The following is sample output from this command:
(config)#interface e1 1/1
(config-e1 1/1)#show test-p attern
QRSS Errored Seconds: 6