ADTRAN 1000R Series debug ip igmp <group-address>

Command Reference Guide Enable Mode Command Set

debug ip igmp <group-address>

Use the debug ip igmp command to enable debug messages for Internet Group Management Protocol

(IGMP) transactions (including helper activity). Debug messages are displayed (real time) on the terminal

(or Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

<group-address> Optional. Specifies the

IP address of a multicast group.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series

units.

Command History

Release 7.1 Command was introduced.

Usage Examples

The following example enable s IGMP debug messages for the specified multicast gro up:

>enable

#debug ip igmp 224.1.1.1