ADTRAN 1000R Series show tcp info [realtime] <control block>

Command Reference Guide Enable Mode Command Set

show tcp info [realtime] <control block>

Use the show tcp info command to display Transmission Control Protocol (TCP) control block

information in the AOS. This information is for troubleshooting and debug purposes only. For more

detailed information, you can optionally specify a particular TCP control block. When a particular TCP

control block is specified, the system provides additional information regarding crypto map settings that

the show tcp info command does not display.

Syntax Description

realtime Displays full-screen output in real time. See the Functional Notes below for more

information.

<control block> Optional.

Specifies a particular TCP control block for more detailed information.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 900 Series units.

Command History

Release 4.1 Command was introduced.

Release 10.1 The real time display option was introduced.

Function Notes

Use the realtime argument for this command to display full-screen output in real time. Information is

continuously update d on the console until you either freeze the data (by pressing the F key) or exit

realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the

information will truncate at the bottom of the screen. In order to maximize the amount of data displayed,

increase the terminal leng th (usin g the terminal length command; refer to terminal length <text> on page

318).

Usage Examples

The following is a sample from the

show tcp info

command:

>enable

show tcp info

TCP TCB Entries