ADTRAN 1000R Series qos [trust cos | default-cos <cos value>]

Command Reference Guide Ethernet Interface Configuration Command Set

qos [trust cos | default-cos <cos value>]

Use the qos (quality of service) command to set the interface to the trusted state and to set the default cost

of service (CoS) value. To return to defaults, use the no version of this command.

Syntax Description

trust cos Sets the interface to the trusted state.

default-cos

Sets the default CoS value for untrusted ports and all untagged packets

(0 to 7).

Default Values

By default, the interface is untrusted with a default CoS of 0.

Applicable Platforms

This command applies to the NetVanta 300, 1000, and 1000R Series units.

Command History

Release 5.1 Command was introduced.

Functional Notes

Set the interface to trust cos if received 802.1P CoS values are considered valid (i.e., no need to

reclassify) and do not need to be tagged with the default value. When set to untrusted, the default-cos

value for the interface is used.

Usage Examples

The following example sets eth 0/1 as a trusted interface and assigns untagged packets a CoS value of 1:

(config)#interface eth 0/1

(config-eth 0/1)#qos trust cos

(config-eth 0/1)#qos default-cos 1