ADTRAN 1000R Series show flash

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 185
show flash
Use the show flash command to display a list of all files currently stored in FLASH memory.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following is a sample show flash output:
>enable
#show flash
Files:
245669 010100boot.biz
1141553 new.biz
821 startup-config
1638 startup-config.old
1175679 020016.biz
821 startup-config.bak
2572304 bytes used 4129776 available 6702080 total