ADTRAN 1000R Series spanning-tree port-priority <value>

Command Reference Guide ATM Sub-Interfa c e Config Command Set

spanning-tree port-priority <value>

Use the spanning-tree port-priority command to select the priority level of a port associated with a

bridge. To return to the default bridge-group priority value, use the no version of this command.

Syntax Description

<value> Assigns a priority value for the bridge group; the lower the value, the higher the

priority (valid range: 0 to 255).

Default Values

By default, the bridge -g r ou p prior i ty va lue is set to 12 8.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.

Command History

Release 1.1 Command was introduced.

Release 8.1 ATM sub-interface was added.

Functional Notes

The only time that this priority level is used is when two interfaces with a path to the root have equal cost.

At that point, the level set in this command will determine which port the bridge will use. Set the priority

value lower to increase the chance the interface will be used.

Usage Examples

The following example sets the maximum priority on the ATM sub-interface labeled 1.1 in bridge

group 17:

(config)#interface atm 1.1

(config-atm 1.1)#spanning-tree priority 0