ADTRAN 1000R Series mac address-table static <mac address> bridge <bridge id> interface <interface>

Command Reference Guide Global Configuration Mode Command Set

mac address-table static <mac address> bridge <bridge id> interface

Use the mac address-table static command to insert a static MAC address entry into the bridge

forwarding table. Use the no form of this command to remove an entry from the table.

Syntax Description

<mac address> Specifies a valid 48-bit MAC address.

<bridge> Specifies a valid bridge interface ID.

interface Specifies the interface. Type mac address-table static bridge interface ? for a

complete list of valid interfaces.

<interface> Specifies a valid slot/port interface ID.

Default Values

By default, there are no static entries configured.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series

units.

Command History

Release 10.1 Command was introdu ced.

Usage Examples

The following example adds a static MAC address to PPP 1 on bridge 4:

(config)#mac address-table static 00:A0:C8:00:00:01 bridge 4 interface ppp 1