ADTRAN 1000R Series

Command Reference Guide Global Configuration Mode Command Set

nat source list <access list names> interface <interface> overload policy <access policy name>

All packet s pa ssed by the access list(s) and destined for the interface using the access policy listed will be

modified to replace the source IP address with the primary IP address of the listed inter face. The overload

keyword allows multip le sou r ce IP ad dr es se s to be rep lac ed with th e sing le IP addre ss of th e sp ecif ied

interface. This hides private IP addresses from outs ide the local network.

nat destination list <access list names> address <IP address>

All packet s passed by the access list(s) entered will be modified to replace the destination IP address with

the entered IP addr ess. The overload keyword is not an option when performing NAT on the destination IP

address; each private address must have a unique public address. This hides private IP addresses from

outside the local network.

Step 4:

Apply the created access policy to an interface. To assign an access policy to an interface, enter the

interface configuration mo de for the desired interface and enter access policy <policy name>. The

following example assigns access policy MatchAll to the Ethernet 0/1 interface:

(config)#interface ethernet 0/1

(config-eth 0/1)#access-policy MatchAll