ADTRAN 1000R Series ip [ssh-server <port>

Command Reference Guide Global Configuration Mode Command Set

ip [ssh-server <port> | telnet-server <port>]

Use the this command to specify alternate transmission control pro tocol (TCP) ports for secure shell (SSH)

and Telnet servers. Use the no form of this command to return to default settings.

Syntax Description

ssh server <port> Configures the SSH server to listen on an alternate TCP port.

telnet server <port> Configures the Telnet server to listen on an alternate TCP port.

Default Values

By default, the SSH server listens on TCP port 22 and Telnet listens on TCP port 23.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Tota l Access 900 Series units.

Command History

Release 11.1 Command was introduced.

Functional Notes

SSH is a newer version of Telnet which allows you to run command line an d graphical application s (as well

as transfer files) over an encrypted connection.

Usage Examples

The following example configu res the Telnet server to listen on TCP port 2323 instead of the default port

23:

(config)#ip telnet-server 2323

The following example configures the SSH server to listen on TCP port 2200 instead of the default po rt 22:

(config)#ip ssh-server 2200

To return to the default settings, use the no version of the command. For example:

(config)#no ip ssh-server 2200