ADTRAN 1000R Series client authentication host

Command Reference Guide IKE Policy Command Set

client authentication host

Use the client authentication host command to enable the unit to act as an Xauth host when this IKE

policy is negotiated with a peer.

Variations of this command include the following:

client authentication host username <username>

client authentication host username <username> password <word>

client authentication host username <username> password <word> passphrase <phrase>

Syntax Description

username

Specifies the value sent via Xauth as the username.

password

<word>

Specifies the value sent via Xauth as the password.

passphrase

<phrase> Optional. Specifies the value sent via Xauth as the passphrase. This is only used with

authentication type OTP (one time password).

Default Values

By default, if this command is not present in the IKE policy the unit does not act as an Xauth host.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 5.1 Command was introduced.

Functional Notes

The specified cr eden tia l s ar e pr og ra m me d into the un it an d th er e is no pr o mp t for ent er ing valu e s

real-time. Therefore, schemes requiring real-time input or additional responses (e.g., SecureID) are not

supported. The client authentication host command and the client authentication server commands

are mutually exclusive. Refer to client authentication server list <listname> on page 1264 for more

information.

Usage Examples

The following example specifies the login credentials to be sent:

(config-ike)#client authentication host username jsmith password password1 passphrase phrase