ADTRAN 1000R Series crypto ca enroll <name>

Command Reference Guide Global Configuration Mode Command Set

crypto ca enroll <name>

Use the crypto ca enroll command to begin CA enrollment procedures.

Syntax Description

<name>

Specifies a CA profile using an alphanumeric string (up to 32 characters).

Default Values

No default s necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 5.1 Command was introduced.

Functional Notes

The type of enrollment procedure is based on the enrollment command and its settings. Refer to

enrollment terminal on page 1219 and enrollment url <url> on page 1220 for more information. This

command initiates a dialog that is used to fill in the parameters that make up an enrollment request to be

forwarded to a certificate authority. Note that some of the parameters (such as IP address) may be filled in

using the values supplied in the crypto ca profile (in which case, the enrollment dialog will not prompt for

those param eters). Once all required parameters are defined using the dialog, this command assembles

them into an enrollment request to be sent to a certificate authority (including the generation of public and

private keys). Refer to crypto ca profile <name> on page 366 for more information.

If enrollment is set to terminal, you may view the request on the terminal screen.

If enrollment is set to url, the request is sent automatically to the certificate authority using the URL

specified by the enrollment url command.