ADTRAN 1000R Series bonding txadd-timer <seconds>

Command Reference Guide BRI Interface Configuration Command set

bonding txadd-timer <seconds>

Use the bonding txadd-timer command to specify the value (in seconds) for the aggregate call connect

timeout. Use the no form of this command to return to the default value.

Syntax Description

<seconds> Specifies the number of seconds the endpoint will wait for additional channels (to

add to the bonded aggregate) before considering the bonding negotiation a

failure.

Default Values

By default, the bonding txadd-timer value is 50 seconds.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, and 4000 Series units.

Command History

Release 1.1 Command was introduced.

Functional Notes

Specifies the length of time both endpoints wait for additional calls to be connected at the end of

negotiation before deciding that the bonding call has failed. The factory default setting is sufficien t for most

calls to connect, although when dialing overseas it may be necessary to lengthen this timer to allow for

slower call routing.

Usage Examples

The following example defines a bonding txadd-timer valu e of 95 seconds:

(config)#interface bri 1/2

(config-bri 1/2)#bonding txadd-timer 95