ADTRAN 1000R Series BASIC MODE COMMAND SET

Command Reference Guide Basic Mode Command Set

BASIC MODE COMMAND SET

To activate the Basic mode, simply log in to the unit. After connecting the unit to a VT100 terminal (or

terminal emulator) and activating a terminal session, the following pr ompt displays:

The following command is common to multiple command sets and is covered in a centralized section of

this guide. For more information, refer to the section listed below:

exit on page 34

All other commands for this command set are described in this section in alphabetical order.

enable on page 17

logout on page 18

ping <address> on page 19

show clock on page 21

show snmp on page 22

show version on page 23

telnet <address> on page 24

traceroute <address> on page 25