ADTRAN 1000R Series ip route-cache <address>

Command Reference Guide Frame Relay Sub-Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 914
ip route-cache <address>
Use the ip route-cache command to enable fast-cache switching on the interface. Use the no form of this
command to disable fast-cache switching and return to process switching mode.
Syntax Description
No subcommands.
Default Values
By default, fast-cache switching is enabled o n all Ethernet and virtual Frame Relay sub-interf aces. IP route
cache is enabled for all virtual PPP interfaces.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 2.1 Command was introduced.
Functional Notes
Fast switching allows an IP interface to provide optimum performance when processing IP traffic.
Usage Examples
The following example enables fast-cache switching on a Frame Relay sub-interface:
(config)#interface frame-relay 1.16
(config-fr 1.16)#ip route-cache
Using Network Addr ess Translation (NA T) or the AOS fir ewall capabilities on an interface
requires process switching mode (using the no ip route-cache command).