ADTRAN 1000R Series redistribute connected [metric <value>]

Command Reference Guide Router (RIP) Configuration Command Set

redistribute connected [metric <value>]

Use the redistribute connected c ommand to pass routes from one network to another, regardless of the

routing protocol implemented on the routing domain. Using the connected keyword allows the

propagation of routes con nected to ot her int erfaces using the RIP routing pr otocol. Use the no form of this

command to disable the propagation of the specified route type.

Syntax Description

metric

<value> Optional.

Spe cifies the ho p co unt to use fo r advertising redistributed OSPF routes

in RIP.

Default Values

By default, RIP is not enabled.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 3.1 Command was introduced.

Functional Notes

Redistributing connected routes imports those routes into RIP without the interfaces in que stio n ac tu ally

participating in RIP. The connected routes imported this way are not covered by a network command and

therefore do not send/receive RIP traffic.

Usage Examples

The following exam ple passes the connected routes foun d in the route table to other networks running the

RIP routing protocol:

(config)#router rip

(config-rip)#redistribute connected