Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 284
show running-config
Use the show running-config command to display a text print of all the non-default parameters contained
in the current running configuration file. Specific portions of the running-config may be displayed, based
on the command entere d.
Variations of this command include the following:
show running-config
show running-config access-lists
show running-config access-lists verbose
show running-config checksum
show running-config interface <interface type> <interface id>
show running-config interface <interface type> <interface id> verbose
show running-config ip-crypto
show running-config ip- crypto verbose
show running-config policy-class
show running-config polic y-class verbose
show running-config qos-map
show running-config qos-map verbose
show running-config router pim-sparse
show running-config router pim-sparse verbose
show running-config verbose
Syntax Description
access-lists Displays the current running configuration for all configured IP access lists.
checksum Optional. Displays the encrypt ed Me ssa ge Dige st 5 (M D5 ) ver sio n of the
running configuration.
interface <interface type> Displays the current running configuration for a particular interface. Type
show running-config interface ? for a list of valid interfaces.
<interface id> Specifies any valid slot/port in te r face (e.g., 0/1).
ip crypto Displays the current running configurat ion for all IPSec VPN settings.
policy-class Displays the current running configuration for all configured policy classes.
qos-map Displays the current running configuration for all configured QoS maps.
router pim-sparse Optional: Displays the current global PIM-SM configuration.
verbose Optional. Displays the entire running configuration to the terminal scree n
(versus only the non-default values).
Default Values
No default value necessary for this command.