ADTRAN 1000R Series switchport mode [access

Command Reference Guide Port Channel Interface Config Command Set

switchport mode [access | trunk]

Use the switchport mode command to configure the VLAN membership mode. To reset membership

mode to the default value, use the no version of this command.

Syntax Description

access Sets port to be a single (non-tru nk ed ) po rt that transmits and receives no tagged

packets.

trunk Sets port to transmit and receive packets on all VLANs included within its VLAN

allowed list.

Default Values

By default, this is set to access.

Applicable Platforms

This command applies to the NetVanta 300, 1000, and 1000R Series units.

Command History

Release 5.1 Command was introduced.

Usage Examples

The following example sets the port to be a trunk port:

(config)#interface port-channel 1

(config-p-chan 1)#switchpo rt mode trunk