ADTRAN 1000R Series telnet stack-member <unit id>

Command Reference Guide Enable Mode Command Set

telnet stack-member <unit id>

Use the telnet stack-member command to Telnet to a stack member.

Syntax Description

<unit id> Specifies unit ID of the stack member to connect to via a Telnet session.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 1000 and 1000R Series units.

Command History

Release 8.1 Command was introduced.

Functional Notes

This command is only available when in stack-master mode.

Usage Examples

The following example Telnets to a member of the stack:

>enable

#telnet stack-member 3

Trying S tack Member 3...Press Ctrl+C to abort