ADTRAN 1000R Series clock set <time> <day> <month> <year>

Command Reference Guide Enable Mode Command Set

clock set <time> <day> <month> <year>

Use the clock set command to configure the system software clock. For the command to be valid, all fields

must be entered. Refer to the Usage Example below for an example.

Syntax Description

<time> Sets the time (in 24-hour format) of the system software clock in the format

HH:MM:SS (hours:minutes:seconds).

<day> Sets the current day of the month (valid range: 1 to 31).

<month> Sets the current month (valid range: January to December). You need only enter

enough characters to make the entry unique. This entry is not case-sensitive.

<year> Sets the current year (valid range: 2000 to 2100).

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 900 Series units.

Command History

Release 1.1 Command was introduced.

Usage Examples

The following example sets the system software clock for 3:42 pm, August 22 2004:

>enable

#clock set 15 :4 2 :0 0 22 Au 20 04