ADTRAN 1000R Series - page 327

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 327
aaa accounting commands <level> [<listname> | default] [none |
stop-only] [group <groupname> | group tacacs+]
Use aaa accounting commands to set parameters for AAA accounting. For more detailed information on
AAA functionality, refer to the Technology Review section of the command aaa on on page 340.
Syntax Description
<level> Specifies the commands enable level. (1=unprivileged, 15 = privileged).
<listname
> Specifies the name of the list.
default Uses the default accountin g list.
none Disables accounting.
stop-only Records stop-only when service terminates.
group <groupname> Uses the specified group of remote servers for accounting.
group tacacs+ Uses the TACACS+ server for accounting.
Default Values
By default, accou nt ing is not en able d.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example create s a list called myList and set s accounting for Level 1 commands at stop-only
activities:
(config)#aaa accounting commands 1 myList stop-only group tacacs+
To complete this command, Telnet must be applied to the lines. See Line (Telnet) Interface
Config Command Set on page 553 for more detailed instructions.