ADTRAN 1000R Series

Command Reference Guide PPP Interface Configuration Command Set

username <username> password <password>

Configures the username and password of the peer to use for PPP authentication.

Syntax Description

<username> Specifies a username by alphanumerical string up to 30 characters in length (the

username is cas e- se nsitive).

<password> Specifies a password by alphanumerical string up to 30 characters in length (the

password is case-sensitive).

Default Values

By default, there is no established username and password.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 1.1 Command was introduced.

Functional Notes

PAP uses this entry to check received info rmation from the peer. CHAP uses this entry to check the

received peer hostname and a common password.

Usage Examples

The following example creates a username of ADTRAN with password ADTRAN for the PPP link

labeled 5:

(config)#interface ppp 5

(config-ppp 5)#username ADTRAN password ADTRAN