ADTRAN 1000R Series show ip igmp interface <interface>

Command Reference Guide Enable Mode Command Set

show ip igmp interface <interface>

Use the show ip igmp interface command to display multicast-related information per-interface. If no

interface is specified, this command shows information for all interfaces.

Syntax Description

Displays information for a specific interface (in the format

type slot/port

). Enter the

show ip igmp interface ?

command

for a complete list of interfaces.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series

units.

Command History

Release 7.1 Command was introduced.

Release 9.1 Command was expanded to include HDLC and tunnel interfaces.

Usage Examples

The following is sample output from this command:

>enable

#show ip igmp interface

eth 0/1 is UP

Ip Address is 10.22.120.47, netmask is 255.255.255.0

IGMP is enabled on interface

Current IGMP version is 2

IGMP query interval is 60 seconds

IGMP querier timeout is 120 seconds

IGMP max query response time is 10 seconds

Last member query count is 2

Last member query response interval is 1000 ms

IGMP activity: 548 joins, 0 leaves

IGMP querying router is 0.0.0.0

IGMP helper address is disabled