ADTRAN 1000R Series logging email address-list <email address> ; <email address>

Command Reference Guide Global Configuration Mode Command Set

logging email address-list <email address> ; <email address>

Use the logging email address-list command to specify one or more email addresses that will receive

notification when an event matching the criteria configured using the logging email priority-level

command is logged by the AOS. Refer to logging email priority-level [error | fatal | info | notice |

warning] on page 464 for more information. Use the no form of this command to remove a listed address.

Syntax Description

<email address> Specifies the complete email address to use when sending logged messages.

(This field allows up to 256 characters.)

Enter as many email addresses as desired, placing a semi-colon (;) between

addresses.

Default Values

By default, there are no config ured logging email addresses.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 9 00 Series units.

Command History

Release 1.1 Command was introduced.

Usage Examples

The following example specifies three email addresses to use when sending logged messages:

(config)#logging email address-list

admin@adtran

.com;ntwk@adtran

.com;support@adtran

.com