ADTRAN 1000R Series frame-relay lmi-n391dte <polls>

Command Reference Guide Frame Relay Interface Config Command Set

frame-relay lmi-n391dte <polls>

Use the frame-relay lmi-n391dte command to set the N391 full status polling counter for the DTE

endpoint. Typical applications should leave the default value for this timer. Use the no form of this

command to return to the default value.

Syntax Description

<polls> Sets the counter value (valid range: 1 to 255).

Default Values

By default, the polling counter for the DTE endpoint is set to six polls.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.

Command History

Release 1.1 Command was introduced.

Functional Notes

The N391 counter determines how many link integrity polls occur in between full status polls. The number

of link integrity polls between full status polls is n - 1, where n represent s the full st atus poll. n can be set to

any number be twe e n 1 an d 25 5 , but the default is used for most applications.

Usage Examples

The following example sets the N391 counter for three polls:

(config)#interface frame-relay 1

(config-fr 1)#frame-relay lmi-n391dte 3