ADTRAN 1000R Series debug access-list <listname>

Command Reference Guide Enable Mode Command Set

debug access-list <listname>

Use the debug access-list command to activate debug messages (for a specified list) associated with access

list operation. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the no

form of this command to disable the debug messages.

Syntax Description

<listname> Specifie s a configured access list.

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 2.1 Command was introduced.

Functional Notes

The debug access-list command provides debug messages to aid in troubleshooting access list issues.

Usage Examples

The following example activates debug messages for the access list la beled MatchAll:

>enable

#debug access-list MatchAll