ADTRAN 1000R Series bonding txfa-timer <seconds>

Command Reference Guide BRI Interface Configuration Command set

bonding txfa-timer <seconds>

Use the bonding txfa-timer command to specify the value (in seconds) for the frame pattern detection

timeout. Use the no form of this command to return to the default value.

Syntax Description

<seconds> Specifies the number of seconds the endpoint allots for attempting to detect the

bonding frame pattern (when a call is connected) before considering the bonding

negotiation a failure.

Default Values

By default, the bonding txfa-timer value is 10 seconds.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, and 4000 Series units.

Command History

Release 1.1 Command was introduced.

Functional Notes

Specif ies the len g th of time both en dpoints attempt to de te ct th e bo nd in g fra m e pattern whe n a call is

connected before deciding the bonding call has failed. When operating with other manufacturers' bonding

equipment, it may be necessary to change this time so that it matches TXADD01.

Usage Examples

The following example defines a bonding txfa-timer value of 15 seconds:

(config)#interface bri 1/2

(config-bri 1/2)#bonding txfa-timer 15