ADTRAN 1000R Series stopbits [1 | 2]

Command Reference Guide Line (Console) Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 544
stopbits [1 | 2]
Use the stopbits command to set the number of stopbits per character for a terminal session. This value
must match the configuration of your VT100 terminal or terminal emulator software. The default is 1
stopbit per character. Use the no form of this command to return to the default value.
Syntax Description
1Specifies 1 stopbit per character.
2Specifies 2 stopbits per character.
Default Values
By default, the stopbits are set to 1.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example configu res 2 stopbits per char acter for the console terminal session:
(config)#line console 0
(config-con 0)#stopbits 2