ADTRAN 1000R Series ip firewall policy-log threshold <value>

Command Reference Guide Global Configuration Mode Command Set

ip firewall policy-log threshold <value>

Use the ip firewall policy-log threshold command to specify the number of connections required by an

access control policy before the AOS will generate a log message. Use the no form of this command to

return to the default threshold.

Syntax DescriptionSyntax Description

<value> Spe cifies the number of access policy connections the AOS

will identify before

generating a log message (valid range: 0 to 4,294,967,295).

Default Values

By default, the ip firewall policy-log threshold is set to 100.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 2.1 Command was introduced.

Usage Examples

The following example specifies a threshold of 15 connections before generating a log message:

(config)#ip firewa ll poli cy-log threshol d 15

The AOS security featur es must be enabled (using the ip firewall command) for the stateful

inspection firewall to be activated.