ADTRAN 1000R Series ip ftp access-class <policyname> in

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 427
ip ftp access-class <policyname> in
Use the ip ftp access-class in command to assign an access policy to all self-bound File Transfer Protocol
(FTP) sessions.
Syntax Description
<policyname> Specifies the configured access policy (ACP) to apply to inbound FTP traffic.
Default Values
By default, all FTP access is allowed.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 9 00 Series units.
Command History
Release 2.1 Command was introduced.
Usage Examples
The following example applies th e configured ACP (labeled Inbound_FTP) to inbound FTP traffic:
(config)#ip ftp access-class Inbound_FTP in