ADTRAN 1000R Series version [1

Command Reference Guide Router (RIP) Configuration Command Set

version [1 | 2]

Use the version command to specify (globally) the Routing Information Protocol (RIP) version used on all

IP interfaces. This global configuration is overridden using the configuration commands ip rip send

version and ip rip receive version. Use the no form of this command to return to the default value.

Syntax Description

1Specifies RIP version 1 be used globally.

2Specifies RIP version 2 be used globally.

Default Values

By default, RIP is not enabled.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 1.1 Command was introduced.

Usage Examples

The following example specifies RIP version 2 as the glo bal RIP ver sio n:

(config)#router rip

(config-rip)#version 2