ADTRAN 1000R Series route-map <map-name> [in | out]

Command Reference Guide BGP Neighbor Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1294
route-map <map-name> [in | out]
Use the route-map command to assign a route map to this BGP neighbor. The route map is then used to
filter or modify inbound and/or outbound BGP route updates. Use the no form of this command to return to
default settings.
Syntax Description
<map-name> Assigns a route map to this BGP neighbor.
in Specifies the filtering/modification of all inbound BGP route updates.
out Specifies the filtering/modification of all outbound BGP route updates.
Default Values
By default, no rout e ma p is assign e d.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 9.3 Command was introduced.
Functional Notes
Before a route map can be assigned to a BGP neighbor, it must first be defined using the route-map
command. See route-map <map-name> [ permit | deny ] <sequence number> on page 495 for more
information.
Usage Examples
The following example assigns a route map to this neighbor for outbound filtering:
(config)#router bgp-neighbor 192.22.73.101
(config-bgp-neighbor)#route-map MapName out