ADTRAN 1000R Series client authentication server list <listname>

Command Reference Guide IKE Policy Command Set

client authentication server list <listname>

Use the client authentication server list command to enable the unit to act as an Xauth server (edge

device).

Syntax Description

<listname> Specifies the named list created with the aaa authen ti ca tion login command.

Default Values

By default, the router does not act as an Xauth server and extended authentication is not performed.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 5.1 Command was introduced.

Functional Notes

When this IKE policy is negotiate d and th e pe er has indicated Xauth via the IKE authentication method

and/or the Xauth vendor ID, this command allows the unit to perform as an Xauth server (edge device).

The specified AAA login method is used to identify the location of the user authentication database. The

client authentication host and the client authentication server commands are mutually exclusive.

Refer to client configuration pool <poolname> on page 1265 for more information.

Usage Examples

The following example enables Xauth as an Xauth server and specifies which AAA method list to use in

locating the user database:

(config-ike)#client authentication server list clientusers