ADTRAN 1000R Series mac address-table aging-time <aging time>

Command Reference Guide Global Configuration Mode Command Set

mac address-table aging-time <aging time>

Use the mac address-table aging-time command to set the length of time dynamic MAC addresses

remain in the switch or bridge forwarding table. Use th e no form of this command to reset this length to its

default.

Syntax Description

<aging time> Set an aging time (in seconds) from 10 to 1,000,000. Set to 0 to disable the

timeout.

Default Values

By default, the aging time is 300 seconds.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 5.1 Command was introduced.

Usage Examples

The following example sets the aging time to 10 minutes:

(config)#mac address-table aging-time 600