Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 174

show crypto ipsec

Use the show crypto ipsec command to display information regarding the IPSec configuration.
Variations of this command include the following:
show crypto ipsec sa
show crypto ipsec sa address <ip address>
show crypto ips ec sa map <mapname>
show crypto ipsec transform-set
show crypto ipsec transform-set <transform-set name>
Syntax Description
sa Displays all IPSec security associations.
sa address
<ip address>
Displays all IPSec security associations associated with the designated peer IP
address.
sa map
<mapname>
Displays all IPSec security associations associated with the designated crypto
map name.
transform-set Displays all defined transform sets.
<transform-set name>
Displays information for a specific transform set.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 4.1 Command was introduced.