ADTRAN 1000R Series pppoe service-name <name>

Command Reference Guide PPP Interface Configuration Command Set

pppoe service-name <name>

Use the pppoe service-name command to use this tag value to filter PPPoE session offers from PPPoE

servers. Use the no form of this command to return to the default setting.

Syntax Description

<name> Specifies a service name by text string (up to 255 characters ) corresponding to

the Service-Name Tags under RFC2516. This string indicates an ISP name (or a

class or quality of service). If this field is not specified, any service is acceptable.

Default Values

By default, no names are specified.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 5.1 Command was introduced.

Usage Examples

The following example defines a service type that is not to be accepted by the AOS:

(config)#interface ppp 1

(config-ppp 1)#pppoe service-name Service_Name