ADTRAN 1000R Series bonding txdeq-timer <seconds>

Command Reference Guide BRI Interface Configuration Command set

bonding txdeq-timer <seconds>

Use the bonding txdeq-timer command to specify the value (in seconds) for the network delay

equalization timeout. Use the no form of this command to return to the default value.

Syntax Description

<seconds> Spe cifies the number of secon ds the end point allot s for atte mpting to equalize th e

network delay between bearer channels before considering the bonding

negotiation a failure.

Default Values

By default, the bonding txdeq-timer value is 50 seconds.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, and 4000 Series units.

Command History

Release 1.1 Command was introduced.

Functional Notes

Specifies the length of time both endpoints allot to attempt to equalize the network delay between the

bearer channels before deciding the bonding call has failed.

Usage Examples

The following example defines a bonding txdeq-timer value of 80 seconds:

(config)#interface bri 1/2

(config-bri 1/2)#bonding txdeq-timer 80