ADTRAN 1000R Series ip radius source-interface <interface>

Command Reference Guide Global Configuration Mode Command Set

ip radius source-interface <interface>

Use the ip radius source-interface command to specify the network-attached storage (NAS) IP address

attribute passed with the RADIUS authentication request packet.

Syntax Description

<interface> Specifies the source interface (in the format type slot/port). Type ip radius

source-interface ? for a complete list of interfaces.

Default Values

By default, no source interface is defined.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 9 00 Series units.

Command History

Release 5.1 Command was introduced.

Functional Notes

If this value is not defined, the address of the source network interface is used.

Usage Examples

The following example configures the Ethernet 0/1 port to be the source interface:

(config)#ip radius source-interface ethernet 0/1