ADTRAN 1000R Series

Command Reference Guide Tunnel Configuration Command Set

ip ospf authentication [message-digest | null]

Use the ip ospf authentication command to authenticate an interface that is performing OSPF

authentication.

Syntax Description

message-digest Optional. Selects message-digest authentication type.

null Optional. Specifies that no authentication is used .

Default Values

By default, this is set to null (meaning no authentication is used).

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 3.1 Command was introduced.

Release 9.1 Command was expanded to include tunnel interfaces.

Usage Examples

The following example specifies that no authentication will be used on the tunnel interface:

(config)#interface tunnel 1

(config-tunnel 1)#ip ospf authentication null